Radio control plane at RC Discount Superstore

Radio Control Plane

The AirStrike radio control plane with its classic civil aviation lines, everything you need packaging and super quick assembly time, is a compact, 34-inch wingspan trainer that transports and stores easily.

Produced from durable yet lightweight materials, the AirStrike is made with the strength needed by new pilots.

The Cessna-like high wing design provides a stable, easy-to-control radio control plane, while the included 3 channel 72 MHz transmitter features controls for variable speed, rudder and elevator in the traditional Mode 2 format appreciated by R/C club instructors. And because its electric, the AirStrike can be flown in areas off-limits to large and noisy fuel-powered models!

A rechargeable 8.4 volt battery pack and automatic 12 volt DC peak charger provide the necessary power for clean, quiet and enjoyable flights. The AirStrike radio control plane contains an auto-cutoff circuit that automatically reduces power to the motor when the battery pack nears the end of its charge, while leaving ample reserve radio power for gliding and a successful landing.

A comprehensive owners manual guides you step by step through final assembly, pre-flight checks and first flights. If youve hesitated to try a radio control plane because you thought it was too expensive, think again. Flight School has never been more affordable

FEATURES
- Takes off from the ground
- Reinforced wing to withstand the strength of high aerobatic radio control plane maneuvers
-High torque 5.6 to 1 ratio drives a large & efficient 8.75 x 5.5 inch prop
-Ball-bearing supported main shaft
-Flies up to 3000 ft above sea level

Set includes:
- 3-channel transmitter
- Rechargeable Flight Pack
- DC Peak Detection Quick Charger

SPECIFICATIONS
Length : 28 inches
Wingspan: 34 inches
Weight: 24 OZ
Requires: 8 "aa" Alkaline batteries

On sale here along with other radio control planes!
Radio Control Helicopters

The New Raptor .30 V2 radio control helicopter is the perfect entry-level nitro/gas model which gives the new pilot a stable learning platform while satisfying what the 3D pilots asked for!

The .30 V2 features tough redesigned side frames, reinforced pitch control arm, improved swash plate, new fuel tank, new muffler, and a fresh new look in a colorful body shell.

The rapid cyclic response makes it possible for the radio control helicopter 3D pilot to execute crisp maneuvers like the Tic-Toc, Chaos, Death Spirals, and some we haven't even seen yet!

Add the optional upgrades such as the PV 0379 Auto Rotation Gear and do 3D maneuvers during auto-rotation. Other options include, the all-metal Main Rotor Hub, Main Rotor Grip, and many more.

The RC Discounts Raptor 30 Package includes only the top-of-the-line components:

- Futaba 7 channel transmitter which comes with four digital servos and a PCM receiver
- Raptor 30 ARF 49BB 39H
- GY410 gyro
- Starter Shaft
- Fuel Pump
- Glow Starter with Charger

This is a COMPLETE radio control helicopter kit and comes with everything you need except batteries and fuel.

On sale here along with other radio control helicopters!


Remote Control Cars & Trucks

CEN Racing has changed the nitro sedan remote control car racing world by introducing the all
newly designed Mercedes CT4 S. This State-of-the-art Ready To Run sedan incorporates
months of extensive testing from all parts of the world to bring you the
fastest, most reliable car on the market.

This high-performance Ready-To-Run
nitro sedan is based on the race proven CT4 R race kit design. The CT4S on-track
performance surpasses all other models in its class.
This is the fastest Ready To Run remote control car available, reaching speeds up to 70
MPH out of the box. It's achieved by using our newly engineered huge 2.5 Big
Block 3 ports Lighting engine in conjunction with an adjustable lightweight
2-speed transmission. .21 class engines will bolt directly into the CT4 S.
(Optional parts required)

Many tuning options have been built into the chassis
design to allow the driver to adjust to any track conditions.
Soon we will release a 3-speed conversion kit to increase speed to over
80 MPH !

Features:
- Super solid 3mm hard anodized aluminum chassis - Hard anodized aluminum
upper deck - Adjustable light weight 2 speed
transmission - Adjustable race style oil filled shocks - Front and rear
spider gear differentials- Cutting edge pivot
ball suspension design - Front and rear .080 race style anti-roll bar - High
Flow manifold with racing tuned pipe
Dimensions:- Four Wheel Drive (3 belt drive
train)- Wheel Base: 260mm (10.24")- Width: 196mm (7.72")- Weight: 1900gm
(67.8oz)- Gear Ratio: 6.825/4.875 (1st/2nd gear)- Ground Clearance: 8mm
(0.31")- Tires: 26mm (1.02") x 65mm (2.56")
Chassis:- Type: Double deck aluminum- Bottom
Chassis: 3mm aluminum chassis- Upper Deck: 2mm aluminum plate
Drive Train:- Type: 3 belts, 4-wheel
drive- Transmission: Adjustable shift 2-speed- Differentials: Bevel spider
gears- Clutch: Standard 2 shoe centrifugal clutch with spring- Pipe: CEN composite tuned
racing pipe- Fuel Tank: 75cc tank with stone filter and primer- Final Drive
Ratio: 6.825 (1st) 4.875(2nd)- Belt Tension: Front and side, ball bearing belt
tension kits- Ball Bearings: Full bearing
Suspension:- Type: Pivot ball- DAmpeners:
Lightweight composite oil filled shocks- Camber: Adjustable front and
rear- Caster: Adjustable- Toe-in: Adjustable front and rear- Down Stops:
Fully adjustable ront and rear
Special Features:- Reliable Mirage III pistol grip
radio-High impact foam bumper- Painted
decaled racing bodies
Engine Details- CEN Racing NX-15 Big Block
"Lighting" engine!- Big Block 2.5- 3 Ports- Dual precision crank
bearings- 35000RPM- SG shafts- True ABC construction- Slide Carb.

On sale here along with other RC cars and trucks!

Remote Control Boats

The CR-914 is a 1:25 scale remote control boat based on the Americas Cup sailboat class. It is 36
long and weighs 6 lbs. 4oz. The CR-914 is a strict one-design class sanctioned
by the AMYA (American Model Yachting Association) There have been over five
thousand kits sold and are over 1000 CR-914's registered with the
Class.SPECIFICATIONS:


Dimensions: 36" length by 8" beam
Hull: ABS plastic
Height: Mast 47-3/4"; Total height 60"
Sail area: 549 sq. ins.
Weight: 6.5 lbs.
Draft: 9-1/4"


The main reasons for this growth and popularity as a class within the
AMYA are simple:


The kits comes with everything you need to build it. Minus sandpaper and
paint.
Easy to build; the hull and deck are cast as one piece.
The keel blade and lead bulb are pre-shaped.
The rudder is finished and cast with the shaft installed.
The Keel and rudder are each attached to the sail boat with one nut allowing easy
removal if necessary.
Two piece aluminum mast, including all necessary fittings and sails.
Excellent sailing performance in a wide wind range. With quick acceleration
and turning this remote control boat will thrill and excite the expert as well as the novice.
Radio Control Transmitter/Receiver/Rudder and sail winch servo included.
The CR-914 is beautiful on display, at home on its cradle or hanging on the
wall with the optional mahogany wall mount.
Electronics come with a limited one year warranty
Kit components covered for one year against manufactures defect


CR-914 Complete Kit with electronics:


Includes everything you need to build the boat. One piece Hull/Deck, Keel,
Rudder, Two Channel Radio w/Rudder and Sail Winch servo, Mast, CA Glue, Upgrade
Kit w/new and improved building instructions, West System epoxy, micro balloons,
sails, and a stand.

The only thing you will need is your choice of paint and
batteries ( 12 - AA size Alkaline or NiCad batteries). Average build time is
15-18 hours with the majority of the time spent finishing the hull of this awesome remote control boat.

On sale here along with other remote control boats!